Washing tank every 6 to 12 months

4000 liters / 880 gallons

How to installation

1) The tank must be installed on a flat and even surface with a strong support.
2) Water outlet and discharge point should use BSPT 304 pipe fitting and other non-ferrous andnon-poisonous product (ABS, PVC & Polypipe).
3) Stop-cock should be placed at the end of the outlet for emergency case.
4) Overflow point should have tracked-connecter, water hose shall be added if necessary.
5) Outlet point shall be fixed with tracked-connector.
6) Discharge point at the centre location of the bottom tank shall be fixed with tracked-connector.
7) Any extra water outlet should be requested before fabrication. No alteration or additional ofwater outlet provided after purchase.
8) All the water pipes connected to the tank openings must be firmly installed to avoid any vibration that resulting rings at the opening loose.
9) Discharge point should have pipe and valve in order to discharge any dirty water or sediment fromthe tank. Recommended to discharge regularly.
10) Use 1/4 inch diameter stainless steel bolt and nut to tighten up the top cover.
11) This stainless steel tank provided with air vent at the top.
12) The location for tank installation must be far away from chemical materials or liquids.
13) Do not use underground source water or contaminated water or chemical for storage.
14) Ensure all pipes connected to the tank are well supported and properly alligned.